Search Products:  
Pit Stop Performance

Complete Valve Job


The following is the labor that will be performed on your head:
Disassemble head.
Clean all parts.
Bead blast eight valves.
Bead blast combustion chambers and valve guides.
Heat head and remove valve guides without causing subsequent damage to head.
Install new bronze valve guides.
Ream new valve guides to match valves.
Resurface valves using Kwik Way valve resurfacing machine.
Grind three angle valve seat to maximize valve potential
using Kwik Way valve seat grinder.
Lap valves into newly ground seats.
Trim valve stem length to match amount of change.
Assemble head with new Viton valve seals.
Install camshafts one at a time.
Adjust shim size to set clearance within Kawasaki specifications.
Your head will be returned to you ready to bolt on.


  • Model: LAB-VJ
  • Shipping Weight: 37lbs

Copyright © 2016 Pit Stop Performance.